About How To Restore Faded Fiberglass

About How To Restore Faded Fiberglass

by Marci Nielsen

Fiberglass has an outer surface made of gel coat. It does not add much value to its structure. Nonetheless, it protects it and makes it look shiny. Additionally, it gives color to the product. Below is a discussion on <A href="http://www.leprechaunmagic.com">how to restore faded fiberglass</A>.

Exposure and time usually erode the outer layer. This makes the item look chalky and dull. However, you do not have to worry about this because it is a problem which can be fixed easily. The initial phase is to clean the product. Lukewarm water is preferred. If possible, use some detergent and a sponge. Nevertheless, you ought to don on some gloves to protect your hands.

Mildew can cause a lot of damage. However, it is not easy to eliminate it. Thus, you should pour some bleach on it. The stubborn stains can be done away with by directly applying the concentrated cleaner on them. Careful rinsing is emphasized to remove all traces of the cleaning detergent. The surface should be dried afterwards.

For better results, all oil should be removed from the item. Not all detergents succeed in accomplishing this. Acetone or MEK should be used for this purpose. However, it is advisable to use a microfiber cloth to apply it. Direct application is discouraged. You may need several of them because you have to discard it once they are covered up with grease. The next step is to wax the item. This can prolong its life.

The procedure of applying wax differs depending on the manufacturer. Therefore, you have to read the instructions given. Nevertheless, a foam pad or cloth is used in applying the wax. Proceed in circular motions. After the wax has dried, you should buff the excess using a soft piece of cloth.

The next step is polishing. This should be done using an abrasive. Fine sandpaper is preferred. It will remove pitted areas. This is not something you can achieve with coating. You should tackle a small section at a time. In addition, the motions have to be circular. Go on until you can see your reflection on the surface. An extra layer of wax should be added after you are done polishing for protection. Some preparations contain wax in the formulation.

Some items are so worn out such that polishing alone cannot restore then to their original state. However, all you need is a strong abrasive. Any wax on the fiberglass should be eliminated before the polishing begins. If you do not do this, you will have uneven surface. Do not go forth and back but rather straight while doing this. Toluene or any other solution which can remove the wax can be utilized.

The last step is application of a restorer. There are so many brands in the market. However, they mode of action is not different from that of wax. However, you do not have to buff the item after applying the restorer. The results are stunning. However, remember that the product flakes off leading to discoloration over time. Thus, you will have to do this more often.



<a href="http://www.leprechaunmagic.com">Read more about</a> Concerning How To Restore Faded Fiberglass.

---------------------------------------------------
You are receiving this because you signed up for it on 2012-04-22 from IP 114.79.13.119
To fine-tune your selection of which articles to receive, just login here:

http://www.uniquearticlewizard.com/bloggers/

using your username:

To unsubscribe please use the following link:

http://www.uniquearticlewizard.com/unsubscribe.php?mail=wisatanusantara3.alankoesumah@blogger.com&code=d48035f43fb1db56998290ec5232b52c
---------------------------------------------------